How to install natural marble walls indoors

Installing natural marble on an interior wall can be a complex process that requires careful planning and execution. Here are the general steps involved in installing natural marble on an interior wall:

Prepare the wall: The wall must be structurally sound, clean, and flat. Any existing wallpaper, paint, or tiles must be removed, and the surface must be leveled and smoothed.

Plan the layout: Determine the best layout for the marble tiles, taking into account any patterns or veining in the marble. Mark the layout on the wall using a straight edge and a level.

Cut the tiles: Use a wet saw to cut the marble tiles to the desired size and shape. It is important to wear protective gear and follow safety guidelines when cutting marble.

Apply adhesive: Apply a high-quality adhesive to the back of each tile using a notched trowel. Make sure to spread the adhesive evenly and only apply as much adhesive as you can work with in a short amount of time.

Install the tiles: Carefully place each tile onto the wall, pressing down firmly and wiggling it slightly to ensure good adhesion. Use tile spacers to maintain consistent grout lines.

Grout the tiles: Once the adhesive has dried, remove the tile spacers and apply grout between the tiles using a grout float. Wipe off any excess grout with a damp sponge and let it dry.

Seal the marble: Natural marble is porous and can absorb water and stains, so it is important to seal it after installation. Apply a high-quality marble sealer according to the manufacturer’s instructions.

Installing natural marble on an interior wall can be a challenging DIY project, so it is recommended to hire a professional installer to ensure a successful and long-lasting installation.