Comment installer des murs en marbre naturel à l'intérieur

L'installation de marbre naturel sur un mur intérieur peut être un processus complexe qui nécessite une planification et une exécution minutieuses.. Voici les étapes générales de la pose de marbre naturel sur un mur intérieur:

Préparez le mur: Le mur doit être structurellement solide, faire le ménage, et plat. Tout papier peint existant, peinture, or tiles must be removed, and the surface must be leveled and smoothed.

Plan the layout: Determine the best layout for the marble tiles, taking into account any patterns or veining in the marble. Mark the layout on the wall using a straight edge and a level.

Cut the tiles: Use a wet saw to cut the marble tiles to the desired size and shape. It is important to wear protective gear and follow safety guidelines when cutting marble.

Apply adhesive: Apply a high-quality adhesive to the back of each tile using a notched trowel. Make sure to spread the adhesive evenly and only apply as much adhesive as you can work with in a short amount of time.

Install the tiles: Carefully place each tile onto the wall, pressing down firmly and wiggling it slightly to ensure good adhesion. Use tile spacers to maintain consistent grout lines.

Grout the tiles: Once the adhesive has dried, remove the tile spacers and apply grout between the tiles using a grout float. Wipe off any excess grout with a damp sponge and let it dry.

Seal the marble: Natural marble is porous and can absorb water and stains, so it is important to seal it after installation. Apply a high-quality marble sealer according to the manufacturer’s instructions.

Installing natural marble on an interior wall can be a challenging DIY project, so it is recommended to hire a professional installer to ensure a successful and long-lasting installation.