Vigilancia del baño

The bathroom is a place where the amount of stone is large. Generalmente, standard rooms in hotels are mainly made of stone in the bathroom. We must understand the functions of the sanitary ware and supporting facilities in the bathroom in order to better complete the lofting work.

The high-end bathroom of a relatively large hotel is divided into 3 small areas, including the bathroom (BATHROOM), the toilet (WC) and the shower room (SHOWROOM), which are mainly divided according to the function. The bathroom is equipped with a bathtub, a sink, and a toilet It includes toilets and bidets, and the shower room is a separate room for showering.

The walls and floors of the toilet and shower room are generally made of stone. In addition to the bathroom countertops, bathtub countertops and vertical panels, the floor is mostly made of stone. The walls are not all made of stone. The conventional practice is to use stone below the waistline. The surface stone is the waistline, dado and footline.

Of course, this is just a routine practice. We must deal with it according to the design drawings. First, we must find out the specific parts of all the stone materials, and then carry out line measurement in different areas.

The toilet and shower room are relatively independent, and the area is also small, and the wall and floor can be measured in a unified way; the bathroom is relatively complicated, and the bathtub table and the sink need to be combined and laid out together.

During the lofting process of the bathroom, it is necessary to know the information of the relevant sanitary ware. The supporting stone materials of the bathtub and the sink must be processed according to the size of the corresponding sanitary ware; for the bathtub, the matching relationship between the countertop and the bathtub and the specification of the bathtub should be known, whether the sink is above the counter basin or under the counter Basin, hole size and location are very critical, including the size of the water pipe of the faucet and the size of the hole, the information must be complete.

The threshold stone is used to close the mouth, and the accuracy can only be determined after the door frame is installed. If the door cover is made of stone, the cutting size can be determined based on the design size.